75
BIOS AND DRIVER SETTING
BIOS AND DRIVER SETTING
4
4.1 BIOS Settings
The board uses UEFI BIOS that is use Serial Peripheral Interface (SPI)
Flash. The SPI Flash contains the BIOS Setup program, POST, the PCI auto-
configuration utility, LAN, EEPROM information, and Serial port support. The
BIOS setup program is accessed by pressing the <Del> key after the Power-
On Self-Test (POST) memory test begins and before the operating system boot
begins. The menu bar is shown below.
Figure 4-1-1: BIOS Menu Bar
4.2 Main Menu
Figure 4 2: BIOS Main screen
In this page, you could make sure you CPU type and DRAM type that you are
install into this system.