Vebabox PSB 75 12 1 GL 0, User Manual, Page: 10 / 21

130-USM.01
User Manual VebaBox Accessories
10
Commissioning Operation
Perform the following steps to connect the electric generator.
- Connect the 110/230V output of the power generator to the
thermal unit(s) using the 110/230V cables supplied with the
thermal unit(s). To do this, use the adapter supplied. This will
allow the thermal units to run at the same time as the electric
generator load.
- Connect the 12V output of the electric generator to the
thermal unit(s) using the wires supplied with the thermal
unit(s).
- Connect the installation cable in the vehicle to the 12V input
of the electric generator.
- To charge the electric generator, connect the 110/230V input
to the mains using the cable supplied.
Warning
To charge the battery and allow the thermal units to operate at
the same time, always connect the 110/230V output of the
power supply to the thermal unit(s) before connecting it to the
power source.