3
EA
GB
USAGE
Safety Information
1. Some parts of the appliance can become very hot and cause burns.
Particular attention has to be given where children and vulnerable people are present.
2. This appliance may be used by children aged eight years or above, people with physical and
mental disabilities as well as those who lack any experience, provided that they have received
detailed instructions about the functionality of the appliance and any risks. Children must not play
with the appliance.
Cleaning and maintenance must not be performed by children without proper supervision.
Children under three years of age should not be near the appliance without constant supervision.
Children between three and eight years old may only turn on/shut off the appliance if it is located
in a suitable position and they have received instructions about the proper course of action, or are
being supervised.
They shall also be informed about possible dangers. Children between three and eight years old may
not connect the device, change its settings or perform care/maintenance.
3. All installation work must be carried out by a qualified technician.
4. The appliance EA are approved for use in dry damp or wet rooms but not in environments where
there is a risk of fire or explosion.
The EA series wall mounted fan heaters comes in five power ranges;
6kW, 9kW, 14kW, 21kW och 30kW.
The heaters can be tilted 0...15° downwards to direct the airflow. Alternatively/additionally the deflector can
be used to direct the airflow further downwards. The auxiliary deflector EALH 10 / EALH 20 can be used to
direct the airflow horizontally. It is possible to mount the heater in the ceiling with the standard brackets.
The fan motor can be altered from full speed (MAX) to reduced speed (MIN) by using the switch on the front.
The fan motor function can be changed from continuously running ( | ) to intermittent mode ( ).
Intermittent mode means that the fan motor starts when the thermostat switch on and stops when the
thermostat switch off, if the external function switch, OK2, is in position or .
The EA is operated by the use of the OK2 external function switch, that can be set for three run-modes:
- Fan only (without heating)
- Fan and reduced heating power
- Fan and full heating power
EA30: If the OK2 is set in the position for full heating power, the fan motor will rotate at MAX speed whenever the
thermostat is heating. The fan motor speed will return to MIN whenever the thermostat stops heating, if the toggle
switch is set to the MIN position.
If the toggle switch is set to the MAX position, the fan motor speed will remain at MAX speed all the time.
If the OK2 is set in the position for reduced heating power, the fan motor speed will remain at the chosen rotating
speed (MIN/MAX) all the time.
OK2