VEAB Heat Tech EA Series, Manual

Page: 3 / 24

3
EA
GB
USAGE
CAUTION !
1. Some parts of the appliance can become very hot and cause burns.
Particular attention has to be given where children and vulnerable people are present.
2. The appliance can be used by children, aged from 8 years and above, and by persons (children included) with
reduced physical, sensory, or mental capabilities or lack of experience and knowledge, if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
3. Children, of less than 3 years of age, should be kept away unless continuously supervised.
Children, aged from 3 years and less than 8 years, shall only switch on/off the appliance, provided that it has
been placed or installed in its intended normal operating position and they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children, aged from 3 years and less than 8 years, shall not plug in, regulate and clean the appliance or perform
user maintenance.
4. The appliance EA are approved for use in dry damp or wet rooms but not in environments where
there is a risk of fire or explosion.
The EA series wall mounted fan heaters comes in five power ranges;
6kW, 9kW, 14kW, 21kW och 30kW.
The heaters can be tilted 0...15° downwards to direct the airflow. Alternatively/additionally the deflector can
be used to direct the airflow further downwards. The auxiliary deflector EALH 10 / EALH 20 can be used to
direct the airflow horizontally. It is possible to mount the heater in the ceiling with the standard brackets.
The fan motor can be altered from full speed (MAX) to reduced speed (MIN) by using the switch on the front.
The fan motor function can be changed from continuously running ( | ) to intermittent mode ( ).
Intermittent mode means that the fan motor starts when the thermostat switch on and stops when the
thermostat switch off, if the external function switch, OK2 , is in position or .
The EA is operated by the use of the OK2 external function switch, that can be set for three run-modes:
- Fan only (without heating)
- Fan and reduced heating power
- Fan and full heating power
OK2