Vea T100, User Manual, Page: 5 / 60

Front Panel and Rear Panel
1. Front panel
1 RF IN : This socket connects to your external aerial.
2 RF LOOP THROUGH: This socket will bypass the RF signal to either your TV or another
video system.
3 COAXIAL: This socket connects to a coaxial socket on your surround sound system.
4 VCR SCART: This socket connects to either a DVD or other video system.
5 TV SCART: This socket connects to your TV.
6 RS-232 PORT: This socket is only used for software upgrade.
7 MAINS CABLE: This is used to connect to your main power supply.
2 2
1 POWER: Used to turn on/off the main power supply.
2 STANDBY INDICATOR: Used to visually show power state of the set top box, the green
LED will be light if turned on the set top box and the red LED will be light if the set top box
entered standby mode.
3 REMOTE CONTROL SENSOR: Used to receive the signal from the remote control.
4 CHANNEL UP/DOWN: Used to change channels without using the remote control.
Serial No.:
100-240V~
50/60Hz
Coaxial Coaxial
Digital
Audio Digital
Audio
VCR O O VCR O O TV TV
SERVICE IN IN R R F F
LOOP LOOP R R F F
THROUGH THROUGH
DIGITAL TERRESTRIAL RECEIVER
POWER SUPPLY: 100-240V~ 50/60Hz
MAX POWER CONSUMPTION: 10WATTS
MODEL: VEA T100
CHANNEL
VEA T100