LVP603 series User Manual
www.videowall.cn
20
Item 22: “
Input_Height”
This item has four values for your choice, i.e.:
100%
,
1/2
,
1/3
and
9/16
.
100%
means that 100% images in vertical direction are input;
1/N
(N=2,3)
means only
1/N
image are input. If 3 sets of
LVP603
are connected in
parallel in horizontal direction, each set of
LVP603
will capture 1/3 of input
image. When the hori-width and vert-height ratio of the image signal
source is 16:9, the black borders will appear in the upper and lower part of
the display, which can be adjusted by the items, 9/16 and NO.24 “Ver In
Str”. Press “
←
” or “
→
” key to select height of input image, then press
“
Enter
” to save the settings.
As shown in Figure 5, the height of input image for the 4 sets of
LVP603
should be set as:
Input_Height
=
1 / 2
Item 23: “
Hori_In_Str
”
It is used to set the horizontal start point of input image from which
LVP603
will capture. As shown in Figure 5, the the horizontal start point of the four
sets of
LVP603
are set as below respectively:
1#
LVP603 Hori_In_Str = 0
2#
LVP603 Hori_In_Str = 960
3#
LVP603 Hori_In_Str = 0
4#
LVP603 Hori_In_Str = 960
Item 24: “
Vert_In_Str
”
It is used to set the vertical start point of input image from which
LVP603
will capture. As shown in Figure 5, the the vertical start point of the four
sets of
LVP603
are set as below respectively:
1#
LVP603 Vert_In_Str = 0
2#
LVP603 Vert_In_Str = 0
3#
LVP603 Vert_In_Str = 540
4#
LVP603 Vert_In_Str = 540