Installing TV tuner
■
Before installing
When installing the TV tuner and the other multimedia components, ensure suitable cable
routing and that the required cable length is available.
In positioning the tuner, allow ample space for plugging the connector plug into and out of
the TV tuner whenever necessary. Audio/video connections should be located for easy access
in future.
Using the metal brackets supplied:
☞
Undo the screws on the sides of the TV tuner housing. Position the metal brackets and
then screw them to the tuner housing.
☞
Then attach the TV tuner at a suitable point using the supplied self-tapping screws.
Installing infrared receiver
■
Installation location
Select the installation location of the IR receiver so that there are no objects between it and
the remote control during normal operation of the remote control from the user’s position.
■
Attachment
The IR receiver is attached with the supplied adhesive pad:
1.
Determine the installation position for the IR receiver.
A
Increased risk of injury in the event of an accident. Do not install components in the inflation
range of the airbag or in areas where the head or knees may knock against them.
2.
Clean installation surfaces with methyl alcohol (spirit).
3.
Peel protective foil away from one side of the double-sided adhesive pad and
attach pad to the bottom of the IR receiver.
4.
Remove protective foil from the underside of the adhesive pad , place IR receiver in
the desired position and press it down firmly.
✎
The installation temperature should be at least 15° Celsius so that the adhesive pad can
develop its full adhesive strength.
Making the electrical connections
☞
Install all cables with care. See illustrations on cover for connection diagram.
☞
Do not cut non-assigned wires. Instead, wind them together and secure to one side. They
may be required for retrofitting additional functions.
Installation instructions
6
Summary of Contents for TV 5200
Page 2: ...Mounting ...
