VDO RCS 4000, Owner'S Manual, Page: 7 / 9

Key functions
RCS 5100, fig. 5a
Key Function
Navigation mode (N) Audio mode (A)
1
Press briefly: RPT .
Repeating a voice message
Press briefly: MUTE .
MUTE
Press longer: ALT-R .
Plan an alternative route
Press longer: no function.
2
Cursor keys:
Move the cursor in menus
4
and
6
: Search (tuner),
Next / previous Track (cassette, CD)
8
and
2
: next / previous preset
3
Mode switch Navigation / Audio Mode switch Navigation / Audio
4
OK : Confirming a selection. OK : Sound menu (sound settings)
5
Press briefly: MAP .
For systems with map display:
Toggle between Menu and map display
Press briefly: SOURCE .
Switching audio source
Press longer: MENU .
Jump to main menu
Press longer: no function
6
Decrease volume Decrease volume / set sound
7
Increase volume Increase volume / set sound
RCS 4000, fig. 5b
Key Function
1
NAVI : Changeover to navigation
2
Cursor keys: Move the cursor in menus
3
OK : Confirm to a selection
4
SOURCE : Changeover to audio, select audio source
5
Decrease volume
6
Increase volume
Replacing battery of the remote control, fig. 4
A
In order to ensure proper functioning of the steering wheel remote control in the
vehicle, it is essential that only CR 2 type batteries are used, which are heat-resistant up to
100 °C according to the battery manufacturer’s specifications.
You have to replace the battery of the remote control, if the device to be controlled
no longer responds to key presses even under favourable circumstances or the device
to be controlled indicates a weak battery.
☞
Remove the remote control from the steering wheel. For this purpose first push the
locking lever towards the +/– buttons and then lift it.
☞
Push the battery compartment lid on the back of the remote control in direction of
the arrow and open the battery compartment.
☞
Remove the discharged battery.
k
7
English