15
For DVB-T reception, connect both the DVB-T antennae included in the scope of deliv-
ery to the PN 4000/6000. Open the rubber cover on the top right of the back and plug
in the antenna cables. The two antennae must be positioned at least 50 cm apart to
enable reception.
DVB-T picture reception switches off at speeds greater than 7 km/h unless the VDO
Dayton back seat cradle is used. DVB-T sound reception and navigational information
continue to be available.
To switch on the television, tap the
DVBT
button in the
Multimedia
menu.
The television screen will be displayed
with the buttons for operating the tele-
vision receiver.
Scanning for and selecting a channel
Call up the scanning and channel selection functions by
tapping the
Channels bar
at the top of the screen.
Tap the
Channels bar
to open the relevant sub-
menu.
Tap the
Scanning Channels
button to
start scanning.
Once the search has ended the list of channels
found will be displayed. Tap the required channel
to view the current programme.
Exit the sub-menu by tapping the
Back
button and return to the previous
menu.
You can now scroll between the programmes using
the up/down
arrow buttons
on both sides of the
Channels bar.
PN 4000/6000
RealQSG-PN4000-6000.book Seite 15 Samstag, 29. September 2007 1:11 01
Summary of Contents for PN 4000
Page 1: ......