Troubleshooting
Display problems
Problem
Cause
Solution
The displayed values
are not those
expected.
Incorrect sensor configuration.
Check configuration in menu
Sensor config
.
Incorrectly connected sensor.
Check the connection, refer to the
Installation instruction
.
The NMEA 2000 network
backbone was incorrectly created.
Check connections and make sure there is a termination at
the beginning and end of the backbone.
"--" and not the
expected value is
displayed or the
gauge pointer blinks in
the layout
NAV DASH
.
Data not available on the network.
Check the correct operations of the sensor.
Sensor not connected.
Connect the sensor, refer to the
Installation instruction
.
The NMEA 2000 network
backbone was incorrectly created.
Check connections and make sure there is a termination at
the beginning and end of the backbone.
The same data is
displayed with two
different alternating
values.
Incorrect sensor configuration.
Check the engine/tank IDs (
Show value as
) in the sensor
configuration, from menu
Sensor config
.
"Invalid value"
The sensor to be calibrated is faulty
or disconnected.
Check or replace the sensor.
"No MediaBox
connected"
MediaBox is not connected to the
NMEA 2000 network or to the
power supply.
Check connections.
"MediaBox not
powered"
MediaBox is connected but off.
Turn on MediaBox, see "MediaBox use" on page 73
Problems on connected 52 mm gauges
Problem
Cause
Solution
The gauge is backlit
but the pointer does
not move.
Data not received from master
Check whether the 52 mm gauge is compatible with the
master. If it is compatible, check that the data is on the master
display.
The pointer does not
move and the gauge
is not backlit.
Master not powered
Check master connections.
Connect the power supply.
No 52 mm chain gauge is
connected to the master.
Connect a 52 mm gauge to the master.
78
7” TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG
Summary of Contents for OCEANLINK -
