IMPORTANT INFORMATION
A
Only trained specialists may install the unit.
A
Observe automotive industry quality standards and the relevant local statutory regulations.
It is essential to observe the following when installing components in the passenger com-
partment:
A
Ensure that the driver has a clear all-round view.
A
Increased risk of injury in the event of an accident. Do not install components in the inflation
range of the airbag or in areas where the head may knock against them.
A
Only install in vehicles with 12V on-board voltage and negative earth. Risk of malfunction, da-
mage and vehicle fire if installed in unsuitable vehicles (e. g. heavy goods vehicles, buses).
A
In order to ensure perfect installation, use only the original components supplied. The use of
non-authorised components may result in malfunction.
Scope of delivery
Check the scope of delivery for completeness before starting work. The complete installation
kit contains:
1
MM 2100 with 7 m connecting cable
3
Sets of fastening elements
1
Installation and operating instructions
Report faulty components to the Service department and notify any damage to the deliverer
(forwarder, package service, post office).
Technical data, design and scope of delivery may vary slightly due to product updating.
Installation
Mounting, Figs. 1 - 3
1. Feed the two long mounting bands with
the finely ribbed side facing inwards into
the slots provided at the top of the mirror
back (Fig 1).
2. Push the two fasteners with the large ribs
facing outwards into the slots provided at
the bottom of the mirror back (Fig. 2).
3. Attach one of the mounting bands to the
corresponding fastener, leaving sufficient
slack for mounting onto the vehicle mir-
ror.
4. Now slide the MM 2100 sideways over the
vehicle rear view mirror. Pull the already
attached mounting band tight so that the
MM 2100 is held firmly in place.
INSTALLATION INSTRUCTIONS
5
English
1
2
