VDO DTCO 4.1, Instruction Manual

Page: 22 / 172

3
Device description Key settings (overview)
22
Instruction manual DTCO 4.1 - Edition 02/2023 - BA00.1381.41 100 102
► Front interface (9)
Data download and parameterisation are
carried out via the front interface (work-
shop).
The front interface is located under a
cover.
The access rights in relation to the func-
tions of this interface depend on the
tachograph card inserted.
è Access rights of the tachograph cards
[
}
27]
■ Key settings (overview)
Important settings on the DTCO 4.1 in-
clude:
• Entering the vehicle registration num-
ber and the country of registration (if
not already carried out by the work-
shop)
è Inserting member state and vehicle
registration number [
}
70]
• Activity changes when the ignition is
off
è
Automatic activities after ignition
on/off (default) [ } 37]
• Recording of speed and revolutions/
min. profiles
è
Printing speed profiles (option)
[ } 90]
• D1/D2 status detection
è Shift start – Inserting driver card
[ } 49]
• VDO Counter display (option)
è
VDO Counter (option) [
}
77]
■ Bluetooth
The DTCO 4.1 can be remotely con-
trolled via Bluetooth.
For this you need:
• An external device with Bluetooth in-
terface, e.g. a smartphone or a test
device.
• Suitable application software (app) on
the external device:
www.fleet.vdo.com.
Bluetooth activation:
è
Registration process [
}
64]
or
è Activating / deactivating Bluetooth
[
}
93]
or that Bluetooth is active, can be seen
in the standard display by a “

” in the
top row: è Displays [ } 40] .