6
Operation by the contractor
Removing company card
70
Operating instructions DTCO 4.0 - Edition 11.2018 - A2C19916900
Fig. 54:
Requesting card (combination button)
Keep the combination button for card
drawer 1 or card drawer 2 pressed down
for at least 2 seconds.
2 Sped. Muster
Fig. 55:
Transferring usage data
The name of the company is displayed.
A status bar displays the writing process
of the company card.
The request to deregister the company is
displayed.
lock-out
company? yes
company? No
Fig. 56:
Deregistering the company on the
DTCO 4.0
1. Use the buttons / to select:
•
No:
The company is not dere-
gistered and the company lock re-
mains activated.
•
Yes:
The company is dere-
gistered and the company lock is
deactivated.
Confirm using button .
IMPORTANT
Despite the deactivated company lock,
the saved data of your company remain
locked for any external companies.
IMPORTANT
A note is periodically displayed when a
periodic inspection of the DTCO 4.0 is
due or the validity of the company card
is about to expire.
2. Remove your company card from the
card drawer.
The display shows:
15:05 0km/h
123456.7km
Fig. 57:
Standard display without cards
The DTCO 4.0 is once again in operating
mode
Operation
, symbol
.
Service Only!