Installing the Roller Interface Module
Switching on the Roller Interface Module
21
• Edition 01/2
009
Switching on the Roller Interface Module
Switching off the Roller Interface Module
The Roller Interface Module is connected to the power supply.
The Roller Interface Module's cover is closed; also see the safety instructions
on
Page 3
◄
Condition
•
Turn the key of the Roller Interface Module clockwise (upwards, to Position “I”).
The LED on the Roller Interface flashes green. The Roller Interface Module
now attempts to establish a Bluetooth connection with the CTC II.
If the LED turns green, the Roller Interface Module is connected to the CTC II
via Bluetooth.
◄
Important
•
Turn the key of the Roller Interface Module anticlockwise (diagonally, to
Position “0”).
The Roller Interface Module is now switched off.
Remove the key to prevent anyone switching on the module accidentally.
The key can only be removed in Position “0”.
◄
Important
