For your safety
General safety instructions
3
• Edition 01/2
009
General safety instructions
The basic requirement for working safely with the Roller Interface Module and
its components is a thorough knowledge of the general instructions, the safety
instructions and the safety regulations.
The service technician contracted to carry out the installation of the CTC II
components must have read and understood this documentation, including
the Chapters on safety.
Danger! Electric shock upon contact with voltage-carrying parts
The electric equipment in the Roller Interface Module operates by means of
dangerous electric voltage.
When the Roller Interface Module is open, it must be switched off – only then
may authorised persons carry out work on the module. Remove the key to
prevent anyone switching on the module accidentally.
◄
Caution
Danger of explosion!
The Roller Interface Module may not be operated in areas which may be
endangered by explosions!
Do not use the Roller Interface Module near flammable liquids or gases!
◄
Caution
Danger of accidents!
While working on the module, adhere to the relevant trade association's safety
and accident prevention regulations.
◄
Caution
Accident danger – rolling road test stand!
Work on the test stand equipment may only be carried out when the Roller
Interface Module is switched off. Remove the key to prevent anyone switching
on the module accidentally.
◄
Caution
