background image

4

OTHER CONNECTIONS

YELLOW CONNECTOR C1 for Line-output (fig. 4)
You can connect a power amplifier with additional loudspeakers to this set:
• Black wire: Connect to Front Left (white) and Front Right (red) channel on amplifier.
• Black wire: Connect to Rear Left (white) and Rear Right (red) channel on amplifier.
• Blue/yellow wire: Connect to Remote on/off on amplifier.

GREEN CONNECTOR C2 (fig. 5)
This gives the following connection possibilities.

TEMPERATURE SENSOR (available separately)

You can connect a temperature sensor to this set to automatically give a visible and audible
warning when the outside temperature becomes lower than 3°C to warn of the possibility of
frost or black ice. The outside temperature can also be shown by pressing the DISPLAY key.

See the mounting instructions for the sensor.

Connect the temperature sensor to the connector on the orange wire and activate in
‘INITIAL SETTINGS’, 
option ‘TEMP’ and set to ‘CELSIUS’ or ‘FAHRENH’.
See ‘TEMPERATURE WARNING’ and ‘DISPLAY OPTIONS’.

This device is an aid only and cannot be used to determine exact road conditions.
Use your own judgement at all times to decide whether it is safe to continue driving.

REMOTE CONTROL (available separately) 

You can connect a wired remote control to this set.
• Connect the wired remote control to the connector on the black wire.
Please note that you can also use an infrared remote control with this set.

TELEPHONE MUTE 

If your car telephone or the car kit of your mobile phone provides a mute signal, it can be used
to automatically interrupt the set’s audio output.
• Connect to the yellow telephone mute wire, use the small contact supplied.

Refer to ‘INITIAL SETTINGS’, options ‘PHONE’ set to ‘MUTE’, and then ‘PHONE LOW’ or ‘HIGH’.

BLUE CONNECTOR C3 for a Digital CD changer (available separately) (fig. 6)
You can only connect a CD changer with a Digital Output to this set (see the mounting
instructions for the CD changer).
Consult your dealer for the exact type.
Reconnect the set only after fully installing the CD Changer.

3

2

1

°

C

A

RC719/819 GB  24/02/00  15:06  Page 4

Summary of Contents for CD 3100 -























Reviews: