background image

 

10

 
While selecting PTY engagement, its 
selection is implemented by preset button   
as described in notes.   
When PTY is selected, the radio starts to   
search corresponding PTY information, and 
stops of the corresponding PTY information 
is detected.   
If corresponding PTY information is not 
found, normal radio reception is resumed.   

Listening to Traffic announcement

 

Traffic announcement can interrupt CD play 
or radio listening when broadcast. 
Briefly press the softkey 

TA

 button F1 (9) to 

select the TA mode on or off. 
When TA mode is on, you will hear the 
Traffic Announcement when broadcast. 
During traffic announcement, you can 
interrupt it by short press of TA button F1 (9) 
without switching off the TA mode. 
By doing so, the set will return to the 
previous operating mode. 
Long press on TA button F1 (9) allows 
ON/OFF selection of TA LOCAL/TA 
DISTANT mode. 
TA LOCAL will only allow traffic 
announcement from strong station to come 
through.  
TA DISTANT (“RDS TA DX” ) selection will 
allow all received announcements to 
interrupt CD play or radio listening. 

ADVANCED RDS SETTINGS

 

Press the sound button (22) for 2 seconds,to 
enter the advanced RDS settings menu. 

a) TA SEEK or TA ALARM 

- TA SEEK mode: 

When TP information gets lost at the 
current station for retune time which is set 
by RETUNE SHORT (30 sec.) or 
RETUNE LONG (90 sec.),the radio starts 
to retune to next same PI station. 

- TA ALARM mode: 

When TP information gets lost at the 
current station, beeps will be heard. 

b) PI SOUND or PI MUTE 

In some countries, there is a possibility 
of having 2 different stations with same 
frequencies but different PI. 
If PI SOUND is selected, radio will switch 
to the new PI station for few seconds 
before switch back to current PI station. 
If PI MUTE is selected, radio will mute 
when a new PI station is received 

c) RETUNE L or RETUNE S. 

When PI information is not caught for 
retune time, the radio starts to retune to 
next same PI station. 

-  RETUNE L mode: 

Retune time selected as 90 seconds. 

-  RETUNE S mode: 

Retune time selected as 30 seconds. 

d) MASK DPI or MASK ALL 

-  MASK DPI mode: 

Masked only the AF which has different 
PI. 

-  MASK ALL mode: 

Masked the AF which has different PI 

and any other interfering non PI station 
which having the same transmitting 
frequency. 

Preset number 

PTY SPEECH group 


 

 

 

 

 

NEWS,AFFAIRS, INFO 
SPORT, EDUCATE,   
DRAMA 
CULTURE, SCIENCE,   
VARIED 
WEATHER, FINANCE, 
CHILDREN 
SOCIAL, RELIGION,   
PHONE IN 
TRAVEL, LEISURE,   
DOCUMENT 

Summary of Contents for CD 1204 -














Reviews: