108
©
Continental Automotive
Issue 08/2023
12
Keypad error
Some keypad is
locked for more
than 3
consecutives
minutes.
Any button in Key
Pad is not working.
Press all buttons
alternately. If the error
persists, go to an
authorized VDO
station.
13
Date and time
adjustment warning
Date and time
adjustment
performed by
user.
This warning
appears when
there is a date and
time adjustment in
BVDR.
Verify the current hour
and date.
14
Over speed warning
The vehicle speed
is more than the
speed limit set in
BVDR or the K
factor parameter
stored in BVDR is
not correct.
A sound alarm will
be emitted when
vehicle moves over
the speed limit set
into the BVDR until
the speed is below
the limit.
Slow down the vehicle
speed below the
speed limit or
recalibrate the BVDR.
16
USB upload error
The USB disk is
defective or full,
the USB input is
defective BVDR.
An error screen will
be displayed and
at the same time
data loading will be
interrupted.
Check the pendrive
space or change the
pendrive. Change to a
working USB disk, if
the error persists,
check the BVDR at the
authorized VDO
station.
17
Workshop temporarily
blocked
Attempt to
manipulate the
data of the
BVDR
or error of
access code or
workshop
password.
This message
appears when
more than 3
attempts to enter
the workshop code
have been
unsuccessful.
This procedure should
be performed only by
an authorized VDO
station.
18
Printer Overheated
Printer overheated
due to several
consecutive prints.
The BVDR cancels
the print job when
it detects the high
temperature.
Wait a few minutes for
the printer to cool, and
try to print again. If the
error persists, go to an
authorized VDO
station.