![VDO AcquaLink Installation Instructions Manual Download Page 8](http://html2.mh-extra.com/html/vdo/acqualink/acqualink_installation-instructions-manual_3721915008.webp)
Available versions
A2C Number Function
A2C59501900 Apparent wind angle gauge
A2C59501901
Apparent wind angle magnified gauge
A2C59501902 Apparent wind speed gauge
A2C59501903 Depth gauge 200m / 660 ft
A2C59501904 Depth gauge 660 ft / 200m
A2C59501905 Speed through water 12 knots
A2C59501906 Speed through water 50 knots
A2C59501907 Speed through water 35 mph / 60 kmh
A2C59501908 Speed over ground 12 knots
A2C59501909 Speed over ground 70 mph / 115 kmh
A2C59501910 Speed over ground 35 mph / 60 kmh
A2C59501911 Compass
A2C59501912 Rudder angle gauge 110 mm
A2C59501913 Tachometer 3000 rpm
A2C59501914 Tachometer 5000 rpm
A2C59501915 Tachometer 7000 rpm
VDO Bus
The VDO Bus is a proprietary CanBus system based on NMEA 2000. Heart of
the VDO Bus AcquaLink system is the Nav Box. The Nav Box provides a wide
range of digital and analogue input possiblities and distributes the received
data to all gauges in the VDO Bus network. The VDO Bus uses M12 8 Pin
cables and all devices are powered through the network.
The Nav Box has three VDO Bus ports, so three seperate VDO Bus segments
can be installed. This helps to reduce the power drop in the system and allows
an easy installation in all areas of the vessel.
Every 110mm gauge has two equal VDO Bus connectors in the rear.
8