background image

GB

It is possible to store up to 50 stations in alphabetical order on this set in a separate FM memory.
You can then select them by name.

LOADING RDS MEMORY

To load all the receivable RDS stations of the current 
reception area into the RDS Memory.

Select the FM waveband.

Select the menu containing 

MEMO

.

Activate the search.

The set mutes.

When the search is completed the set beeps again and you hear the first alphabetically stored
station.

SCROLLING THROUGH THE RDS MEMORY

Activate

/Deactivate alphabetical station selection.

If this operation has already been performed (and there are stations in the memory) if not you
hear a beep and should proceed as described under

‘LOADING RDS MEMORY’ point

.

Select the desired station.

PTY PREVIEW (PROGRAMME TYPE)

It is possible to search for all the currently available stations with a PTY code on the FM band,
giving you direct access to the type of programmes (e.g. 

SPORT

NEWS

POP

, etc) which relate to

these subjects. The list of station types is memorised for about 10 minutes, after that time a
new list will be created when you activate PTY.

Select an FM waveband.

Select the menu containing 

PTY

.

Activates the search if no stations memorised.

The set mutes. 

When the search has finished, 

you hear a beep and the last station found with 
the first available PTY displayed.

When there are stations in the memory:

Scroll through the PTY selections.

Select the desired PTY.

You then hear that station. If more than one station 
has the same PTY code (e.g. 

SPORT

) each time 

you select 

SPORT

you will hear the next station 

related to that subject.

PTY is not yet implemented in all countries.

2

1

3

2

1

2

3

1

3

2

1

13

RDS MEMORY STORE

Next
Function

Next
Function

SEARCH

TRACK

PRESET -

RC749/849 GB  15/06/99  11:25  Page 13

Summary of Contents for 3300

























Reviews: