VDO Cyclecomputing C1DS, Instruction Manual

Page: 36 / 56

76
GB
If you have selected the Metric system (KM) you have to enter your wheel size/s in millimeters.
If you have selected English system (MI) you have to enter your wheel size/s in inches.
TIP: Write down your wheel sizes on your VDO-User-Card for easy reference. The values
listed in the chart >>>P08 are approximate. Depending on the tire brand, it is possible that
these numbers deviate from your real tire circumference since height and tread pattern are
likely to be different.
Setting the wheel sizes :
a c
“TRIPDISTANCE/SETTINGS”
a c
“WHEELSIZE/SET”
a c
“KMH-DISPLAY” or “ MPH-DISPLAY” to be selected
<<actual wheel size 1 flashes>>
a
set wheel size 1 in [mm] or [in]
(Press up/down key briefly for 1 mm, keep pressing key for fast forward run)
c
“?SET OK?” accept or return by pressing
b
and correct your entries. “WHEELSIZE 1 /
SET DONE” pops up briefly, to indicate data storage.
Your computer now wants you to set wheel size 2.