UK-7
3. P
Insert the iPod/iPhone players in
the iPod docking bracket ixedly, the iPod indicator will appear on the main unit display. (F10) Note: The CD/iPod
door can’t closed under the docking open.
4. P
PLAY/PAUSE/SCAN
once to play the current track.
5. Adjust the volume control by
6. P
PLAY/PAUSE/SCAN
once to pause the current track.
7. To skip forwards or backwards, press the
(UP or DOWN) button
to select the desired track.
Note: When the iPod touch iPhone screen has been locked, above operation are still available.
During the unit in iPod/iPhone MENU mode:
Note:
iPod touch&iPhone series needs to manual into the music menu first, then proceeding the next operation.
1. During the unit in iPod mode, ress the STOP/MENU/INFO button
once, the unit
will enter to the iPod/iPhone MENU mode. To select the current menu as belows :
Music > Extras > Photo Import (without this function display on the iPod Mini) > Settings > Shuffle Songs >
Backlight > Now Playing will shows on the iPod/iPhone Player display.
2. Press the FOLDER/ARROW (UP or DOWN) button on the remote control to search the current menu.
3. Press the SELECT/MONO/ST. button
enter to the desired menu folder.
4. Press the FOLDER/ARROW (UP or DOWN) button on the unit (or remote control) to search the current
content in the each desired menu folder.
5. If you want return to the iPod menu, press the STOP/MENU/INFO button
again.
Charging the iPod/iPhone Player battery through the main unit:
1. iPod/iPhone Player has a internal nonremovable battery, the battery may need to be charged that is not used for
a while.
2. You can charge the iPod/iPhone Player through the main unit automatically under the STANDBY or POWER ON
mode.
Notes:1. The iPod/iPhone Player battery is 80-percent charged in about an hour, and fully charged in about a few
hours. If you charge it while playing music, it may take longer.
2. It is not better to charge under the TUNER mode. It may interfere the reception.
3. In any time, you can control the iPod/iPhone player on the main unit, remote control or iPod/iPhone player
itself while the unit in the "iPod" mode.
4. In any time, the iPod/iPhone player must be fixed well under in the STANDBY mode to avoid the unit and
iPod/iPhone player were damaged.
ress the iPod DOOR OPEN/CLOSE button once on the unit first to open the iPod door, then press the iPod DOCK
OPEN button to open the iPod docking (see point 2 on Assembly Drawing of unit).
ress the
button on the unit (or remote control)
pressing the VOLUME (+ or -) button on the unit (or remote control).
ress the
button on the unit (or remote control)
SKIP/TUNE SEARCH
on the unit (or remote
control)
p
on the unit (or remote control)
on the unit (or remote control)
on the unit (or remote control)
MUTE SETTING (on the remote control)
Press the MUTE button on the remote control to stop the sound from the speakers temporarily, the sound stops and
the display will show “MUTE”. To cancel mute, press the MUTE button again or press the /-, “MUTE”
disappears in the display and the sound is restored.
LISTEN TO THE MUSIC BY USING HEADPHONE
penal
SPECIFICATION
POWER SUPPLY : AC 230V~50Hz
OUTPUT POWER : 5 Watts x 2
UNIT DIMENSION : 500 (W) x 104 (D) x 214.5 (H) mm
N. W. : 2.4 kg
RADIO SECTION
FREQUENCY RANGE : FM 87.5 - 108 MHz
DAB/DAB+ 174 - 240 MHz
COMPACT DISC SECTION
OPTICAL PICKUP : 3 - BEAM LASER
FREQUENCY RESPONSE : 100Hz - 16kHz
Plug your headphones (3.5mm mini-stereo plug) into the headphones jack on the left
of the unit. The sound
will be heard through the headphones, not the speaker.
SPECIFICATION SUBJECT TO CHANGE WITHOUT FURTHER NOTICE.
Ventilation warning : " The normal ventilation of the product shall not be impeded for intended use."
Press
button
(on the remote control)
AUX IN PLAY
press
button
EQ CONTROL
When you press the EQ button, the sound tone changes as below:
The AUX input is located at the left of the unit. Use a 3.5mm stereo jack cable to connect audio equipment through
the LINE IN jack.
1. To select the AUX input function, repeatedly
the DAB/FM/AUX
on the unit (or remote control) until the
AUX is indicated on the display.
2.
the VOLUME (+ or -)
on the unit (or remote control)
to adjust the sound output level.
Note: LINE in cable not included.
F10
