7
TIPS
1.
Over-loading the coil causes clog and waste.
2.
Before sliding sleeve off to view coil or chamber tip,
heat Vdab a few
seconds, or damage to wick is possible
. Hold upright, remove slowly. Note:
This action breaks the thread of material that can form between the coil
and chamber tip. We suggest an “only when needed” approach.
3.
The Vdab works better in a more vertical position. This allows material
to melt down onto the coil and for vapor to draw.
4.
It won’t work if you tip the battery end up. The material flows
backward and can even seep between the load chamber and the sleeve.
We call this ‘melt-back’.
5.
To avoid melt-back, let wax cool a few seconds before laying Vdab flat.
Or use STAND
11
to keep Vdab upright.
Summary of Contents for EverSmooth
Page 1: ...User Guide ...
