27
“Charging” and the power percentage of the main battery.
2.
If user uses battery power, “Power property” interface will show the power status of the
“main battery” and the “ left power percentage” show the ratio of power left in main
battery.
3.
“Solution” refers to solution of power supply. There are 2 solutions for option: Battery
power and AD power. Under these solutions,
system-default for “User Free”, “System
Free” and “Hang Up” is “Never”.
The following interface “Device Status” shows the power level of all devices involved.
6.5 Keyboard Setting
Double click “Keyboard” icon on “Control panel” and the following interface will
appear.
This is much the same as the function of “keyboard” in “Control panel” of PC. The
function is mainly used to adjust the repeat input of soft keyboard and the setting of
repeat delay time. A test dialog is available as shown below to test your setting.
The “Enable character repeat” in the interface is the choice box of “Enable character
repeat”; “Repeat delay” is for setting repeat rate. The white zone at the bottom is a zone
