VCS VIP 1000, User Manual

Page: 17 / 118

VIP 10 / VIP 1000 17
Installation
4
Installing the unit
With its ultra-compact dimensions, the VIP is particularly well suited for
installation in cabinets.
Warning!
The unit is intended for use indoors or in a protective enclosure. Select a
suitable location for installation where the equipment is not subject to
extreme temperatures or humidity. The ambient temperature must lie
between 0 and +50 °C. The relative humidity should not exceed 80%.
The unit generates heat during operation. Ensure that there is adequate
ventilation and also that there is enough clearance between the unit and
heat-sensitive objects or equipment.
Make sure the following conditions for installation are complied with:
]
Do not mount the unit close to heaters or other heat sources. Avoid locations
subject to direct sunlight.
]
Allow sufficient space for running cables.
]
Ensure that the unit has adequate ventilation.
]
Use only the cables supplied for connections or appropriate cables, which are
also shielded against electromagnetic interference.
]
Position and run all cables so that they are protected from damage, and
provide strain relief where needed.