VCom Inc.
BTR5857 Manual; ML_BTR5857_02 (Mar 2004)
Approved: G.C.
13
STEP 3 – Position BTR5857 against pole
Using the other hand, bring the BTR5857 up to the pole catch and grab V-bolt, pole catch and L-bracket in a single
hand. Ensure that the pole is inside the “L” of the L-bracket and not on the outside of the L. This is necessary to
ensure stability during high winds.
STEP 4 – Tighten BTR5857 against pole
Tighten both ¼” locknuts against the L-bracket so that the unit is held against the pole but can still be rotated and
tilted up and down for antenna alignment. The locknut closest to the antenna can be tightened almost all the way
while the back one should be approximately finger tight.
2.2.2 Applying the Self-Adhesive Label to the Antenna
Mount the antenna according to the manufacturer’s instructions.
☛
Included with the BTR5857 unit is a self-adhesive label for application to the antenna. To operate the
BTR5857 in compliance with FCC regulations, you must apply the included label to the antenna used with the
BTR5857. Peel off the protective backing from the label and affix it to the antenna such that the label is
readable from a distance of 5 feet.
D
D
D
D
IAGRAM
IAGRAM
IAGRAM
IAGRAM
2.2
2.2
2.2
2.2
C
C
C
C
: A
: A
: A
: A
PPLYING THE
PPLYING THE
PPLYING THE
PPLYING THE
SSSS
ELF
ELF
ELF
ELF
----A
AA
A
DHESIVE
DHESIVE
DHESIVE
DHESIVE
LLLL
ABEL
ABEL
ABEL
ABEL