Vacuum Packaging Machines 07P ...
Safety, warranty
2 Safety,
warranty
2.1
General safety instructions
Pay particular attention to the following instructions:
•
Anyone in the owner’s factory who is involved in the installation, commissioning, operation and
servicing (inspection, maintenance, repairs) of the machine must have read and understood the
complete Operating and Maintenance Manual, in particular Chapter 2 "Safety, warranty".
•
This machine has been manufactured and assembled according to the state of the art and is safe to
operate. We attach particular importance to the safety of the users and to arranging the controls
ergonomically.
•
In order to guarantee the safety of the operator, we have taken care to ensure that the purchased
parts of the machine also comply with the Machinery Directive 98/37/EC. The vacuum pump comes
with a certificate. The declaration of conformity of the manufacturer of the vacuum pump is available
from the machine manufacturer.
•
Our Quality Assurance Department (QS) performs continuous tests on individual parts and on the
complete machine.
•
All safety and protective equipment is included in this safety concept which is geared towards
protecting everybody employed to work on or with this machine against dangers.
IMPORTANT
o modifications may be made which change or prevent the functioning and action of the safety
and protective equipment. The manufacturer refuses to accept liability in those cases!
•
The machine should only be operated if all the safety and protective equipment is in place and
working correctly.
IMPORTANT
Always follow the switch-off procedures outlined in the Operating Manual during all installation,
commissioning, operation, resetting, adjustment and maintenance work.
•
No process should be carried out which reduces the safety of the machine.
•
The operator has to immediately report any changes to the machine which lessen safety standards.
•
The operator should only operate the machine if it is in perfect working order.
•
The user has to give appropriate instructions and perform checks to ensure that the area around the
machine is kept tidy and well organised.
IMPORTANT
The machine MUST be switched off before installation, service and repair work is carried out on
it. Before this work gets under way, switch off the main switch and put on a padlock to prevent
the machine being switched on inadvertently. Keep the key out of the reach of other people!
2003-11-05
Art. no. 527.763
Page 11/74
Summary of Contents for 07P Series
