VC20XX Operating Manual
6
3.1.1 C6SEN084
This board takes the picture. It is used in the VC2028, VC2038 and VC2038/E
The CCD sensor 1/3" SONY ICX424AL (B/W) is used. The board controls the CCD sensor and
processes the analog signal.
The progressive scan type CCD sensor used is ideally suited for industrial machine vision tasks. In
contrast to the conventional technique it provides the following features:
•
1/3" sensor
•
resolution: 640x480 pixels
•
square pixel format, 7.4(H) x 7.4(V) µm
•
full-frame
shutter
•
can be triggered externally
(except VC2028)
•
sensor read out in full-frame mode (non-interlaced)
•
shutter speed down to 30,80,... µsec in steps of 50 microseconds up to 20 sec
•
40fps
@
640x480
(VC2028 : 25fps@640x480)
•
CCD processors providing CDS, programmable gain and offset, auto black level
compensation and 10 bit AD-conversion
The diverse features of this board (high-speed and low-speed shutter, external trigger, etc.) are
configured via software.
For the exact setting of the configuration, refer to the description of the configuration program in the
software documentation.
3.1.2
C6SEN204
This board takes the picture. It is used in the VC2066 and VC2066/E
The CCD sensor ICX204AL (B/W) is used. The board controls the CCD sensor and processes the
analog signal.
The progressive scan type CCD sensor used is ideally suited for industrial machine vision tasks. In
contrast to the conventional technique it provides the following features:
•
1/3" sensor
•
higher resolution: 1024x768 pixels
•
square pixel format, 4.64 µm
•
full-frame
shutter
•
can be triggered externally
•
sensor read out in full-frame mode (non-interlaced)
•
shutter speed down to
10 µsec
and up to 20 sec
•
16fps @ 640x480 or 2 x binning @ 32fps
•
CCD processors providing CDS, programmable gain and offset, auto black level
compensation and 10 bit AD-conversion
The diverse features of this board (high-speed and low-speed shutter, external trigger, etc.) are
configured via software.
©
1996-2007 Vision Components GmbH Ettlingen, Germany
VC20XX_HW.pdf
