1/17/2020
How to setup a VC MIPI OV9281 on a Raspberry PI Model 3B+
https://www.vision-components.com/fileadmin/external/documentation/hardware/VC_MIPI_OV9281_Raspberry_PI_Model_3BPlus/index.html
5/13
Always disconnect other cables before connecting or disconnecting the MIPI module!
Warning
Always disconnect all cables before connecting or disconnecting the MIPI module!
The ends of the MIPI module connector cable is marked with the hardware to connect to. Open the socket connectors first by raising their lid, insert the cable and press their
lid back when mounted correctly. You should then not be able to pull the cable out.
Open the MIPI module socket, put in the cable, close the MIPI module socket
Warning
The connection at this type of socket is not protected against bad alignment, so always check the orthogonality, and if it is bent, correct it! Also watch out for the
right orientation of the cable! The MIPI module or the Raspberry Pi can be irrevocably damaged if the cable is not inserted the right way, and warranty is lost!
Harmfully angled (left) and good (right) cable fixation
The socket type is also not protected against wrong orientation, so compare your setup to the figures below before switching the power on.
