I
P
C
A
M
E
R
A
3.IPCAM detects DHCP when system starts working. IPCAM Enables
DHCP protocol to accept IP address from NAT when NAT router detected.
Default IP address becomes 192.168.1.126 when NAT router not detected
.
Suppose there is an IP address 192.168.1.126 on internet
.
This device must be turned off prior to IPCAM renew the IP setup
.
3.QUICK SETUP
3.1 IP SETUP for IPCAM
3.1.1 Run IPCameraSearcher
Run IPCameraSearcher.exe
,
the setup window will appear
on your computer
3.1.2 IPCameraSearcher Instruction
1.Search(S): Search all the IPCAM in the network. Click one of the
IPCAM address to login.
2.Config IE(C): IE Security Setup.
* Inappropriate setting might cause the browsing in accessible
.
3.Apply(A): Search all IPCAM address automatically.
4.After setting an IP address, the following IP addresses will each
automatically add up by one accordingly.
5.Update IP(I)
:
Set the IP address of the indicated IPCAM
,
then press
“
OK
”
to reboot the IPCAM
.
8
Summary of Contents for 11932
Page 2: ......
