Video Server User’s Guide
11/83
Hardware Installation
1. Attach video source to Video Server
To use this device, user must supply video source to this device first. Typical,
user may utilize box camera, doom camera, bullet camera, P/T camera, Speed
doom camera, or others as the video source. Connect the BNC terminal of
camera to the device’s video input and make sure to power on these cameras
first. Otherwise, the operation may be incorrect.
2. Attach audio source to Video Server (option)
If user needs not only video stream but also audio stream, then the audio source
should be attached to Video Server. User may utilize line output of standard
camera or audio amplifier, or others as the audio source. Connect the RCA
terminal of audio device’s line output to the Video Server’s RCA input and make
sure to power on your camera or audio device first.
