manualshive.com logo in svg

VBrick dme, Admin Manual

The VBrick DME Admin Manual is a comprehensive guide that allows users to effectively manage and operate their VBrick DME system. Available for free download on our website, this manual provides step-by-step instructions and valuable insights to optimize your video streaming experience.

Share
Download
background image

VC Gateway Configuration

DME Admin Guide

151

hardware and software from Vbrick, the number of lines is determined by the DME model; if 
you purchased software-only, the number of lines is determined by license.)

De liv e r a VC Ga t e w a y  St re a m

The VC Gateway creates an RTP input stream of the video conference which you can output 
in multiple ways to local and remote viewers. A VC Gateway stream is no different than any 
other DME input stream. This means you can use any of the streaming output methods 
(Flash Push, RTSP Push, Transport Stream, HLS Streaming, RTP Relay) supported by the 
DME. See DME Output Streams for more about delivering VC Gateway streams 

The VC Gateway streams are delivered to the RTP Server. If you wish to deliver the VC 
Gateway stream using any of the output use cases supported by the Multi-protocol server, you 
must configure an internal RTSP/RTP pull (In-6) to make the stream available to the 
Multi-Protocol server. 

VC Gateway Streams Playback

Playback of VC Gateway streams is only limited by the configured output and the players you 
have available to play that output. For more about playing back VC Gateway streams, see Play 
a DME Stream.

VC Ga t e w a y  a n d  VEM S M y s t ro  I n t e g ra t io n

The VC Gateway is closely integrated with the VEMS Portal Server. It can display live VC 
Gateway streams on the 

Live Video

 pages in VEMS. It can record and save VC Gateway 

streams on the 

Stored Video

 pages (in VEMS 6.x only). VEMS Mystro recording functionality 

is configured on the Details pages for incoming and outgoing lines. 

•

Live Video

 – Provided SAPs are enabled for the outgoing streams, DME streams 

sourced from the VC Gateway are automatically discovered and displayed in VEMS. 

•

Stored Video

 – The VC Gateway can be configured to automatically record and ingest 

streams into VEMS Mystro 6.x only using the VC Gateway “record” feature. These 
streams will be displayed on the 

Stored Video

 pages. 

DME Model

Total Lines Available

7530 (BPS)

12

7550 (XPS)

30

7570 (HPS)

60

Note

: The DME can receive a G.711 audio stream from the VC 

Gateway via a connected call and will convert the audio to AAC which 
can then be streamed out of the DME via RTP and other delivery 
methods. Without a VC Gateway the DME cannot pull directly from 
a source that has G.711 audio. The video input through the VC 
Gateway must be H.264.

Note

: If you exceed the permitted number of recordings, allowed by 

VEMS Mystro, the recording(s) will fail and an application error will be 
shown on the VEMS Dashboard—

not

 in the DME.

Summary of Contents for dme




























































































































































































































Reviews:

No comments

Related manuals for dme

Perkins 4016-61 TRG Operation And Maintenance Manual preview
4016-61 TRG
Brand: Perkins Pages: 92
Vedeneyev M-14P Maintenance Manual preview
M-14P
Brand: Vedeneyev Pages: 381
Flux COMBIFLUX FP 314 PVDF Original Operating Instructions preview
COMBIFLUX FP 314 PVDF
Brand: Flux Pages: 28
Grundfos MGE 100 Instructions Manual preview
MGE 100
Brand: Grundfos Pages: 36
MTHTrains Rail King RS-1 Operator'S Manual preview
Rail King RS-1
Brand: MTHTrains Pages: 20
O.S. Speed 12xz Spec II Instruction Manual preview
12xz Spec II
Brand: O.S. Speed Pages: 20
O.S. engine MAX-55HZ HYPER Instruction Manual preview
MAX-55HZ HYPER
Brand: O.S. engine Pages: 23
Rockwell Automation MPF-A310 Installation Instructions Manual preview
MPF-A310
Brand: Rockwell Automation Pages: 28
Toyota 12H-T Repair Manual preview
12H-T
Brand: Toyota Pages: 338
Wood-mizer LT30HD Safety, Setup, Operation & Maintenance Manual preview
LT30HD
Brand: Wood-mizer Pages: 208
Cuyuna 215 R/D Service Manual preview
215 R/D
Brand: Cuyuna Pages: 36
ULPOWER UL260i Operating Manual preview
UL260i
Brand: ULPOWER Pages: 24
BARTOLONE ENGINES bb942 General Instructions For Use & Safety preview
bb942
Brand: BARTOLONE ENGINES Pages: 5
TILLOTSON HU Series Service Manual preview
HU Series
Brand: TILLOTSON Pages: 8
Yamaha F60C Owner'S Manual preview
F60C
Brand: Yamaha Pages: 96
Moog SmartMotor SM34165MT-IP Ethernet Ip Manual preview
SmartMotor SM34165MT-IP
Brand: Moog Pages: 160
Rotax 24-30-00 Service Instruction preview
24-30-00
Brand: Rotax Pages: 21
Perkins 2806D-E18TA Operation And Maintenance Manual preview
2806D-E18TA
Brand: Perkins Pages: 3

Brands by name

Popular brands

Load more brands