VBrick AmiNET130, Quick Start Manual

Page: 10 / 34

4 © 2010 VBrick Systems, Inc.
10. When done, scroll to the bottom of the page, enter the "save" password, and click
Save
Changes
.
11. Then exit back to the main menu, scroll to the bottom of the page, and click
Reboot
.
After a minute or two, the splash page will be displayed.
Table 1. AmiNET130 Management Passwords
Displaying the STB Management Page
Most configuration changes are made on the
STB Management
page. When the STB
management pages are displayed, use Tab, Esc, Enter and the arrow keys to navigate through
the menus.
T
To display the
STB Management
page:
1. When the VBrick splash page is displayed, press
Ctrl+Up Arrow
and click
OK
. (If the
Opera splash page is displayed, go to Step 2.)
2. Then press
Alt+M
and enter the administrator password (see Table 1).
3. Make any configuration changes as necessary.
Use Alt+P
to display Preferences.
4. When done, scroll to the bottom of the page, enter the "save" password, and click
Save
Changes
.
5. If a reboot is required, exit back to the main menu, scroll to the bottom of the page, and
click
Reboot
.
Standard Definition Default
480p NTSC
576p PAL
720p HDMI
1080i HDMI
Function Password
VBrick "administrator" password
admin
VBrick "save" password
admin
VBrick Telnet password username:
root
password:
admin
Standalone "administrator" password †
leaves
Standalone "save" password †
snake
Standalone Telnet password † username:
root
password:
root2root
† "Standalone" refers to a set top box not purchased from VBrick and not configured with a
graphical user interface.
Note After making configuration changes you may need to reboot to commit the changes. If
so, exit back to the main menu and scroll to
Reboot
at the bottom of the page.