118
© 2015 VBrick Systems, Inc.
If Presenter Mode has
not
been enabled, the
Manage Presentation
button will not be present
on the Login screen and logging in will be required. An admin may disable this button so that
log in is required. (See: Disable Presenter Mode Access from the Login Screen)
Presenter Mode must then be accessed by clicking on the
Manage Presentation
button within
the VBAdmin interface. See: Access Presenter Mode and Controls.
For information on how to use the Presenter Mode interface itself, see: Presenter Mode User
Guide.
Disable Presenter Mode Access from the Login Screen
The ability to access Presenter Mode from the Login screen without logging in is enabled by
default. To remove this ability you must disable the
Manage Presentation
button from the
Login screen.
To disable Presenter Mode access from the Login screen:
1. Navigate to
System Configuration
>
Advanced Configuration
2. Click the
Edit
button.
3. Deselect the
Allow Presenter Control Without Login
checkbox.
4. Click
Apply
>
Finish Edit
.
5. The
Manage Presentation
button will no longer appear on the Login screen. Presenter
Mode will now have to be accessed after logging in.
Note:
If access without log in is enabled, Presenter Mode may also be accessed by
direct URL as well by accessing the Presenter encoder’s name or IP address. The full
URL is: http://<presenter encoder name or IP>/presenter.htm
Summary of Contents for 9000 Series
