manualshive.com logo in svg

VBrick 8000-0188, Quick Start Manual

Share
Download
VBrick 8000-0188 Quick Start Manual Download Page 44

Software Upgrade

Multi-Format STB Quick Start

39

3. Open the VEMS Mystro 

client

 interface and create a schedule, for example a 

Rebroadcast 

Content

.

4. Set the schedule for 

Now

 with a 

Duration

 of 1 minute. 

When selecting destination output 

devices, be sure to select all of the STBs you will be upgrading.

 

5. After the schedule runs the VEMS 

Upgrade Server Page URL

 will be written to each STB. 

If the current 

Upgrade Server Page URL

 value has changed, you will see the following 

message. This is normal behavior and no user action is required. 

6. After the reboot, if a firmware upgrade is required, you can choose to run the upgrade or 

not run the upgrade. If you run the upgrade, the STB will reboot, load new firmware, and 
you are done. If you do nothing, the upgrade will automatically begin after five minutes. 

If a STB needs to upgrade but the firmware image file is not on the server, the failure page 
below is displayed. This page will display every time the STB logs into VEMS, including after 
a schedule runs. (See Cancelling the Upgrade below to disable this functionality.)

Cancelling the Upgrade

If you choose to cancel an upgrade by clicking on one of the images above, the cancellation is 
only temporary and you will see the same image prompt every time the STB reboots. If you 
have trouble upgrading or do not want the STB checking for an upgrade at startup, you can 
cancel upgrade checking permanently. 

Summary of Contents for 8000-0188




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands