background image

Getting Started

Multi-Format STB Quick Start

5

Figure 4.  

Local Fullscreen Mode 

Portal Server Mode (VEMS 5.x)

In Portal Server Mode the set top box has a complete "channel guide" populated by the 
VEMS Portal Server. The channel guide displays both live streams and stored streams from a 
VOD server. You will typically use the handheld Remote Control to navigate through various 
menu options (see Using the Remote Control on page 41 for more about using this device). 
You can also connect and use a USB keyboard. 

Figure 5.  

Portal Server Mode (VEMS 5.x) 

In Portal Server Mode all live and stored content is hosted from the Portal Server and the 

MENU

 button provides a subset of Portal Server functionality. 

To display menu options, 

Note

As noted in the Preface, there are important differences in behavior depending on 
whether you are using the set top box with a VEMS 5.x system or with a VEMS 6.x 
system. Whenever there is a difference in behavior, it will be noted in the text.

Note

In Portal Server Mode you may be prompted for a PIN when the set top box is 
powered on or rebooted. PIN numbers are enabled by default and are assigned to each 
user in VEMS. To change or disable the PIN, see Users > Add /Modify User 
Information in the 

Portal Server Admin Guide

Summary of Contents for 8000-0188




































































Reviews: