a Network Drive. You can add and set up the media recording
device at any time later.
Setting up
1. Make sure that UPnP is enabled on your network
router (In most routers this feature is enabled by
default)
2. Connect the VBox to your DVB-T/T2 Antenna or DVB-C
Cable TV.
3. If you would like to record, connect a USB Hard Drive
or USB Flash Drive, you can setup recording to a network
storage at a later stage
4. Connect the network cable from the VBox to your
network router
5. Connect the VBox to the power adapter and press the
power button located at on the back panel of the VBox
6.
Connect the VBox XTi to the power adapter
Make sure that UPnP is enabled on your network router
(In most routers this feature is enabled by default)
Additional Ways to Set Up
Setting up with your Tablet or Smartphone (Android
and iOS)
1. Run the “VBox Live TV” app.
2. The app will search your network for the VBox device.
3. The app will open the Quick Setup Wizard (Proceed to
Step 1)
