VBM REPLICA 2B, Instruction Manual

Page: 84 / 284

26
E
N
G
10.1,
PROGRAMMING THE DOSES.
You can store the amount of coffee dispensed for all the buttons on the pushbutton panel, except the continuous dispensing button
“ ”.
WARNING:
Programming the first pushbutton panel on the left, the other pushbutton panels on the machine will
automatically be programmed.
You can also customise the amount of coffee dispensed for each pushbutton panel by repeating dose programming
for each single one.
•
Mount the filer holder containing coffee on the unit (see the paragraph OPERATION).
•
Place one or two cups on the cup holder grille depending on what you want to program.
•
Access user programming until the following is shown on the display:
PROGRAMMING
SELECT IN 30”
•
Press the button “ ” (1) to be programmed within 30 seconds; coffee dispensing will start and the LED (2) go off.
•
Once you have reached the desired amount of coffee, press the button previously selected again to stop dispensing; the LED (2)
will flash a few times and then stay on fixed.
•
Repeat the same operations for the other buttons “ ” (3), “ ” (4), “ ” (5) and “ ” (6) on the pushbutton panel;
the following will be shown on the display according to the type of dose programming in progress.
PROGRAMMING
ESPRESSO
= “ ” one espresso (1);
PROGRAMMING
COFFEE
= “ ” one long coffee (3);
Manuale_Replica2B Elettronica_Rev0_5lingue_03-2016.indd 26 19/04/16 17:28