Lada Niva Manual - Maintenance
Page 26
4 (8 A)
RH headlight (upper beam)
10 (8 A)
Voltage regulator
5 (8 A)
LH headlight (lower beam)
Alternator field winding
8 (8 A)
RH headlight (lower beam)
11 (8 A)
Rear fog lamp
7 (8 A)
LH side light (marker light)
12 (8 A)
Electric motors of headlight wipers
and washer
Marker light warning lamp
13(8A)
Back window wiper and washer
RH tail-light (marker light)
14 (I6 A)
Back window heater (power
circuit)
RH member plate lamp
15 (16 A)
Reserve fuse
8 (8 A)
Instrument lighting lamps
16 (8 A)
Emergency flasher system switch
RH side light (marker light)
end direction indicators operating
LH tail-light (marker light)
in emergency mode
Cigarette lighter illumination lamp
LH number plate lamp
9 (8 A)
Oil pressure gauge
Low oil pressure warning lamp
Fuel level gauge and low fuel warning lamp
Coolant temperature gauge
Direction indicators with warning lamp
Backing light lamps
Parking brake warning lamp
Brake Fluid low level warning lamp
Differential look warning lamp
Battery no-charge warning lamp
Choke warning lamp
Tachometer
Carburettor electromagnetic valve
Flasher unit of parking brake warning lamp
Direction indicator flasher unit
Back window heater (control circuit)
BODY
Care of Body
To preserve the attractive appearance of the car give constant attention to the car body
surfaces. To prevent scratches on the body do not remove dirt and dust from the car with dry
rags. Wash the car when mud is still wet, using a weak water spray end a soft sponge. In hot
weather wash the car outdoors in the shade. If this is impossible, immediately wipe the
washed surfaces dry, since drops of water that dry under the sun rays leave stains on the body
painted surface. At sub- zero ambient temperatures, having washed the car in a warm room,
wipe the body dry before a trip because frozen drops of water may cause cracks on the body
paint coating. It is not recommended to use soda and alkaline solutions, as they may tarnish
the paint coating.
When using a hose for washing, see that water does not get on the electric units in the engine
compartment.
Minor chipping of paint on the car body should be timely sanded and coated with the paint
contained in the tin furnished with the car.
In case corrosion of the car body parts is detected (corrosion traces, local paint blisters, etc.),
take necessary measures to eliminate corrosion and prevent its further spreading.
www.ladanivabelgium.tk
