V60G-HOME-I
User Guide
Vayyar Confidential
Page 6 of 19
Chapter 1
Introduction
This guide provides information on the installation and operation of the Vayyar V60G-HOME-I
modules.
V60G-HOME-I is a family of multi-antenna millimeter-wave modules operating at 60GHz bands, based
on the company’s VYYR7201 RF SoC, generating a 3D image of the sensor’s vicinity by transmitting and
receiving mm-wave signals from multiple antennas (MIMO), used as a fixed field disturbance sensor or
a short-range device for interactive motion sensing.
Models pertaining to the V60G-HOME-I family are intended to be integrated with an additional host,
either a PC-host operating the device through a USB interface, or a microcontroller-unit (MCU) for
integrated and embedded products.
The sensor detects objects in a defined arena and provides 3D-data of the targets to the host, such as:
position within the arena, class or posture; a raw 3D image (point-cloud for example).
Typical applications for the device can be touchless input device (e.g. gesture-recognition interface),
in-room people detection and monitoring for improving comfort and energy-utilization optimization
(e.g. HVAC operation and airflow optimization), detection of abnormal conditions such as fall of elderly
people and apnea in adults and babies, and in-cabin monitoring for detection of infants left in car.
The models participating in the V60G-HOME-I family (and certified under modular-approval) include,
but not limited to: vStraw_CTPB4_I, vBLU_OK_CTPB4, vBLU_MW_CTPB4.
1.1
Release Information Note
Software capabilities, algorithmic capabilities and different features are under continuous
development and improvement.
This document provides basic description of the system and it is operated. For more details – contact
Vayyar LTD through –