- 06 -
- 07 -
Control panel
Chapter 3
Two Wheel Scooter Installation Guide
Control instructions
Use control panel to control scooter, the specific features are as follows.
Riding speed
Battery status
Speed gear
Power switch
Light switch
.
1. 1
After turn on, the default speed gear is “ 1 ”, press “+” to increase speed gear and press “-” to decrease speed gear.
The highest display is gear 3 . ( the display will change to speed data 3 seconds after adjust the speed gear)
Long press the power switch button for 3 seconds to turn on the scooter. The control panel shows the power,
riding speed and battery status.
Different gear complies with different riding speed. Gear 1: 0-9 Km/h, Gear 2: 9-18Km/h, Gear 3: 18-25Km/h.
1 . 3
1 .4 Pr e ss t h e p o we r button thr ee ti m es to s w itc h b etw e en Km / h and m p h.
1 . 5 Whe n t he b r a k es are applied in e m erg e ncy , t he br i ght n ess o f t he br a ke li ght inc rea ses and f las hing af ter t he bra ke
h a ndl e
a re g r i pped.
1 .6
1 .7
1 .2
Press the light switch to turn on front light, press light switch again the front light will be off.
Battery power display: four bars are 100 %, three bars are 75 %, two bars are 50 %, one bar are 25 %.
Cruise Mode: Press throttle and keep it at same speed without changing and last for 8 seconds to activate cruise mode.
(The display screen will flash for three times when cruise mode activating)
