Vaya CLASSIC, User Manual, Page: 19 / 24

19
ELCARE NORDIC: service.vaya@elcare.com
Push both sides of the tyre towards the centre and away from the rim to loosen the tyre.
Insert a tyre lever anywhere between the tyre and the rim, but not where the tube valve
is located. Insert a second tyre lever close to the 昀椀rst one and press it down on the tyre
lever. Continue this process all around until you can remove the tyre.
After the wheel is removed, carefully remove the inner tube starting with the valve.
Check the inner surface of the tyre for any sign of damage or foreign matter.
After the tube has been repaired, partially in昀氀ate the inner tube using a bicycle pump.
Carefully feed the inner tube into the tyre, starting with the valve. The valve must be
aligned with the hole in the wheel rim.
Re昀椀t the tyre in the rim, one small section at a time. For the last part, use the tyre levers
to re昀椀t the last section.
Replacing Brake Pads
Remove the mounting bolt.
Remove the brake pad.
NOTE: Pay attention to the order and orientation of the spacers as you remove them.
Check the instruction of the new brake pads to 昀椀nd out which side to install them.
Add the replacement brake pad with the spacers in the same order and orientation as
when you removed them.
E-BIKE SPECIFICATIONS
Net weight: 21,8 kg
Max load: 120 kg
Size: 185 x 59 x 112 cm
Wheel size: 28 x 1,75 inch / 700 x 45 mm
Max compatible wheel size: 28 x 1,75 inch / 700 x 45 mm
Weather resistance: IP54
Bike gear counts: 7
Assistance mode gear counts: 5
Max pedal assistance speed: 0-25 km/h
Boost mileage: up to 50km