VAXIS TOM 500 SDI TX, Instructions Manual

Page: 17 / 20

Connection issue
1.Check and make sure the power supply functions well on both the transmitter and
the receiver.
2.Check if the battery level is enough, If the battery level is too low, Please change
another battery.
3.Change to another channel to troubleshoot
4.Re-paring the device
Display issue
1.Please check if the video source is connected to the HDMI IN interface correctly.
2.Check if the OLED displays the video format. If not, check if the HDMI cable conn-
ected to transmitter is correctly linked with the camera and if the camera has the
video output
3.Check if the format of the camera output interface is compatible with this system.
Video image stuck issue
1.Check if the HDMI IN/OUT cables are connected well.
2.Check the signal strength status to see if the signal strength is too weak Change
the channel or shorten the distance between the devices.
APP CONNECTION ISSUES
1.Check the number of connected APP device. 1 transmitter can connect with/up to a
maximum of 3 devices for wireless monitoring.
Troubleshooting