190612
Green Grounding Screw (E)
Headless screw (D)
Mounting Screw (B)
Lock Nut (F)
Mounting plate (A)
Rubber Pad (H)
Ball Nut (G)
Wire Connector (C)
Turn on the power at fuse or circuit box
3. Pull out the source wires and the house grounding wire from the outlet box. Make wire connections using the
wire connectors (C):
---Connect the black wire from the fixture to the black wire from the power source.
---Connect the white wire from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting plate (A) with the green grounding screw (E). Then connect it to
the house grounding wire with a wire connector (C).
Carefully put the wires back into the outlet box.
4. Attach the fixture to the mounting plate (A) by inserting headless screws (D) into holes on back plate, and then secure
it with two rubber pads (H) and two ball nuts (G).
NOTE: With silicone caulking compound,caulk complete around the back plate meets with the wall surface to
prevent water from seeping into the outlet box.
5. Install a bulb (not included). See relamping label at socket area or packaging for maximum allowed wattage.
A: 5-1/2"
T0517
T0522
B: 9-1/2"
C: 7"
A: 6-1/4"
T0518
T0523
B: 11-3/4"
C: 8"
A: 8-1/2"
T0519
T0524
B: 14-3/4"
C: 10-1/2"
Spare Parts List:
The following parts are available for re-order if damaged or missing.
Mounting Hardware
6128MM (1 SET) foT0517 T0518 T0519
6129MM (1 SET) foT0522 T0523 T0524
A
B
C
Glass
10104CS for T0517 T0522
10105CS for T0518 T0523
10106CS for T0519 T0524