Assembly Kit
5813MM (1SET)
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Turn on the power at fuse or circuit box
Mounting Screw (B)
Wire Connector (F)
Ball Nut (G)
Rubber Pad (H)
Cross Bar (A)
Green Grounding
Screw (C)
Headless
Screw (D)
1. Turn off the power at the main fuse or circuit breaker box before starting installation.
2. Loosen the wire connector connected with the wires from photocell. (See Fig.1)
Note: Do not move the photocell to prevent water from seeping into the outlet box.
3. Take a white pigtail and black pigtail and make wire connections using wire connector: (See Fig.2)
a. The black wire from the fixture to one end of the black pigtail.
b. The white wire from the fixture to one end of the white pigtail.
c. The other end of the black pigtail to the black wire from the power source.
d. The other end of the white pigtail to the white wire from the power source.
Put all wires back into the back plate of the fixture.
Wires From Fixture
Wires From
Main Power
Wire Connector
Pigtail
Operation the Unit Without Photocell
Fig.2
171221
Lock Nut (E)
A:5″
B:11″
C:6″
A
C
B
Photocell
White Wires From Photocell
Wire Connector
Wires From Fixture
White Pigtail
Red Wires From Photocell
Black Wires From Photocell
Fig.1
Wires From Fixture
Wires From
Main Power
Wire Connector
Pigtail
Fig.2
