Page 1 / 4
220209
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
T0627
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Wall Mounted
Eave Mounted
Sensor
Backplate
Light Fixture
Fixture Mounting Screw
Decorative cover
Important to Know:
1. If you are not familiar with state and local electrical
codes, it is recommended that you consult with a
qualified electrician.
2. This fixture requires a 120 VAC, 60 Hz power
source.
3. For general safety and to avoid any possible
damage to the sensor, be sure the power is
switched "off" before adjustment.
Features:
Maximum Wattage: 22 W
Working Temperature Range: -
13
°
F ~
113
°
F
1. Energy saving LED fixture.
2.
Capable to function as a standalone wall switch light or
as part of a Link Group
.
3.
When connected to a Link Group, light will receive
signal to turn ON at full brightness automatically when
motion sensor signal is detected and then DIMS light to
low level brightness automatically when motion stops.
5
.
The wall switch that the light is connected to can be
used to manually override and change functionality
and settings of certain modes.
#8/32X1/2 in
Tools Needed:
1. Phillips-head screwdriver for attaching mounting screws to
mounting strap, mounting bracket and fixture to mounting bracket.
2. 1/8” wide flat-head screwdriver for connecting the source wires
into the wiring terminal station on the mounting bracket.
(2) 1/8" wide Flat-head Screwdriver
Hardware Package (included):
Mounting Screw X2
Fixture Mounting Screw
Mounting Strap
Mounting Screw X2
#6/32 X1/2 in
Mounting Screw X2
#10/24 X1/4 in
Decorative cover
Mounting Strap
Outlet Box
Mounting Screw
Mounting
Bracket
FRONT
L GND N
L GND N
Mounting Screw
Fixture
Mounting
Screw Hole
Terminal
Mounting
Bracket
Screw Hole
Note: Fixture can be wall mounted or eave mounted.
4.
When connected to a Link Group, light will receive
signal to remain OFF daylight hours and automatically
turns the light ON during evening hours.
(1) Philip-head Screwdriver
