Vaxcel F0095, Manual, Page: 5 / 11

PAGE: 5 / 11
IMPORTANT:
BEFORE YOU BEGIN INSTALLATION, CAREFULLY READ ALL INFORMATION PROVIDED IN THE SAFETY
INSTRUCTIONS AND INSTALLATION INSTRUCTIONS. IF IN DOUBT, CONSULT A QUALIFIED
ELECTRICIAN.
SAVE ALL INSTRUCTIONS.
Tighten the two collar screws.
Slide lock pin into hanger pin until
it is locked into position.
Turn OFF the electric circuit at the
main fuse fuse or circuit breaker
box.
Hang the fan on hanger bracket, and
make sure the slot of hanger ball is
snapped into the chip of hanger bracket
exactly.
Note: For sloped ceiling installation,
make sure the slot of hanger ball and
the chip of hanger bracket face down.
Lock Pin
Collar Screws
NOTE: The fan weight is 10.69 lbs (4.85 kg). Be sure the outlet box you are using is securely attached to the building
structure and can support the full weight of the fan. Failing to do so can result in serious injury.
Remove the lock pin from the
hanger pin and remove the
hanger pin from the downrod.
Thread the motor wires through the
downrod stand cover, decorative cap
(Making sure the smooth side of
decorative cap is facing downward.),
canopy and downrod.
Loosen the collar screws out part way.
Insert the downrod into the collar.
Slide hanger pin through holes of
collar and downrod.
Downrod
Tighten the hanger bracket to the outlet box with two mounting screws.( Make sure
the outlet box is securely installed so that it will be able to support at least
the fan weight. ) Attach the safety cable hook to the ceiling with the drywall screw
and washer, and make sure the safety cable hook is covered by the fan canopy.
WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED "ACCEPTABLE FOR
FAN SUPPORT"!
Washer
Safety Cable Hook
Dry Wall Screw
Ceiling
Hanger Bracket
Ceiling Joist
Wood Member
(2" x 4" Approx.)
Junction Box
Fig.5.
Ceiling
Hanger Bracket
Ceiling Joist
Wood Member
(2" x 4" Approx.)
Junction Box
Fig.2
Stand Cover
Hanger Pin
Stand Cover
Downrod
220829