![Vax VZL-702 Instruction Manual Download Page 4](http://html1.mh-extra.com/html/vax/vzl-702/vzl-702_instruction-manual_4254428004.webp)
www.vax.co.uk
4
assembly / operation
3. How to Assemble
IMPORTANT:
Always unplug the vacuum cleaner
from the electrical outlet before assembling or
removing the accessories.
1.
Insert the flexible hose (Fig.3/1) into the inlet on the
main body of the vacuum cleaner. Making sure the
projected parts on the hose are aligned. Turn the
hose to the right until it clicks into lock position.
2.
Push the telescopic extension tube on to the end of
the handle (Fig.3/2).
3.
The telescopic tube can be lengthened or shortened
by pushing the button in and sliding the tube apart
or together as required (Fig.3/3).
4.
Fit the combination floor head by pushing onto the
extension tube (Fig.3/4).
4. How to Operate
Cord Release
Fully unwind the power cord. A yellow mark on the power
cord indicates the recommended cord length. Do not
exceed the cord length beyond the red mark.
On/off Button
1.
Insert the plug into the electrical outlet.
2.
Press the on/off switch located on the top of the
vacuum cleaner, to switch on the vacuum cleaner
and press the button again to turn the vacuum
cleaner off.
Carpet Cleaning
Model VZL-702 only:
For carpet and rug cleaning, press the
rocker switch on the combination floor head to raise the
brushes.
Model VZL-704 only:
Attach the TurboBrush to the end of
the extension tube. For large carpeted areas.
Hard Floor Cleaning
Model VZL-702 only:
For hard floor cleaning, press the
rocker switch on the combination floor head to lower the
brushes.
Model VZL-704 only:
Attach the hard floor tool to the end
of the extension tube. For parquet and laminate
coverings.
Cord Rewind
To rewind the power cord, press the cord rewind button,
located on the top of the vacuum cleaner, and guide the
power cord with one hand. This will prevent the cord from
whipping which could cause damage or injury.
Carry Handle
Use the carry handle located at the rear end of the
vacuum cleaner to move from room to room.
Hose Storage
For convenience there is a parking slot located at the rear
of the vacuum cleaner where the floor tool and hose can
be parked for carrying and storage.
!
!
!
!
Fig.3/1
Fig.3/2
Fig.3/3
Fig.3/4
Vax VZL-702&704 User Guide v5.qxd 27/9/07 15:47 Page 4