Looking After Your Machine
12
vax.com.au
vax.co.nz
Remove the rubber ring.
Push both buttons to open
the turbo tool.
Removing blockages from the TurboTool
Using a pair of scissors, cut any hair or
debris free from around the brushes.
Changing the belt
Switch off and unplug your
vacuum cleaner. Recline
the vacuum and lie it on its
front, remove 5 screws to
release brushbar cover.
Lift the brushbar out of the
fl oor head and remove the
drive belt.
Remove the brushbar cover
and push the fl oor head
into reclined position.
Remove the drive belt and
any debris from the spindle.
Loop new drive belt around
the spindle fi rst and then
onto the brushbar. Insert the
brushbar back into fl oor
head and replace the
brushbar cover, insert 5
screws to secure.