Vax VX58, Let'S Get Started

Page: 7 / 24

Getting started
Assembling your Cordless SlimVac
Line up the connector on
the reach wand with the
Powered Head. Push the
reach wand down onto
the Powered Head until it
clicks into place.
Push the handheld down
onto the reach wand until
it clicks into place.
The upright slim vacuum
cleaner is not free standing
and in between uses must
always be placed in the wall
bracket or laid fl at on the
fl oor, in a suitable location
so it does not become a trip
hazard or can be stepped on.
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Before you begin
CAUTION : Always switch off the vacuum cleaner before connecting or disconnecting the handheld/attachments
or removing and emptying the dirt container.
IMPORTANT:
The vacuum cleaner is equipped with overheat protection. If for any reason the vacuum cleaner does
overheat the thermostat will automatically turn the vacuum cleaner off . If this happens, remove the battery. Remove
and empty the dirt container also check the vacuum cleaner for blockages. Allow the vacuum cleaner to cool for
approximately 1 hour (if you have cleaned the fi lter please wait 24 hours for the fi lter to fully dry before putting back
into the machine).
For best cleaning results, fi lters require cleaning at least every 3 months and should be replaced every 6 months
depending upon use. If the vacuum cleaner is blocked, remove the battery before removing the blockage.
CAUTION : This vacuum cleaner is not free standing. In between uses or when carrying out any maintenance
always lie fl at on the fl oor in a suitable location so it does not become a trip hazard or can be stepped on.